Wall Type Indicator Post

Wall Type Indicator Post

installation instructions: 1. unload the upper cover of control lead
2. Measure control lead depth, remove the excess part of connector lead and driving rod
3. fit the control with full closed valve, turn the position plate to SHUT position
4. Load upper cover
Send Inquiry
Add To Inquiry
Product Introduction

a wall type indicator post generally was installed in building’s main water line,and is used to control the fire sprinkler system. The valve will make the fire department control of the water flow in case of a fire.

a wall type indicator post allows the firefighters to open or close the valve by a safe distance where the actual fire is. That's a precaution because when fire happens, not safe to enter a building just to close a sprinkler riser system.

 

22Keyhole Plate Gasket2EPDMASTM D2000
21Keyhole2Origanic glass
20Keyhole Plate2A283Gr.cASTM A36
19Bolt、Flat Gasket4S.S.304ASTM A276
18Screwed Plug11035ASTM A449
17Bolt21035ASTM A449
16Nut21035ASTM A449
15Screw11035ASTM A449
14Lift Ring11035ASTM A449
13Gasket1A283Gr.cASTM A36
12Handwheel1CIASTM A126
11Upper Cover1CIASTM A126
10Retainer Ring For Stem11566ASTM A29
09Driver1S.S.304ASTM A276
08Posistion Bracket1S.S.304ASTM A276
07Stud Bolt41035ASTM A449
06Nut, Gasket41035ASTM A449
05Indicator Plate4A413.0ASTM S12A
04Main Body1A413.0ASTM A126
03Driving Rod1CIASTM A29
02Cotter Pin11045ASTM A449
01Joint11035ASTM A126
NO.NameQty.MaterialRemark

 




Hot Tags: wall type indicator post, China, manufacturers, suppliers, factory, customized, price

Send Inquiry

whatsapp

Phone

E-mail

Inquiry