BS750 Pillar Fire Hydrant

Description

BS750 pillar fire hydrant is designed to give permanent access to water supply. A wide range of options are available and they are usually manufacturered in cast iron. The internal valves and fittings are normally in gunmetal.The nominal diameter available are 100mm(4'') and 150mm(6'').The hydrants fall into two categories i.e. either dry barrel or wet barrel type with 2 or 3 outlets which can be flanged, valved or screwed.Hydrants can also be custom made accordingly to your specific requirements. 

Details

Installation

Hydrants should be handled with care to avoid damage. It is recommended to keep hydrants closed unitl use.

If the hydrant is not to be used straight away then it is recommended to coat threads and other machined parts with anti-rust oil and the hydrant should be stored in a dry and ventlated area. For long-term storage,the hydrant should be checked regularly.

Before installation of hydrants,the connection should be free from dirt or other matter.

The positioning of the hydrant should be in accordance with local requirements.

Ideally the pumper should face the street and all connections should be away from any obstruction to connecting hoses.

The inlet elbow should be placed on a solid surface and if possible brace the side opposite the incoming flow to reduce reaction stresses 

The underground parts of the hydrant should be surrounded with coarse gravel for support and drainage.

After the hydrant has been installed and tested,it is recommended to fullyflush the hydrant before closing for service.Before replacing the nozzle caps, it is recommended to check for correct drainage of the hydrant on closing of the valve.This can be achieved by placing a hand over the nozzle opening, a suction should be felt.

FAQ

Q: Can the products be customized?

A: Yes, customized products is available, we can do OEM for customer or produce according to customer’s requirement.

Q: Can you do OEM for me?

A: We accept all OEM orders, just contact us and give me your design. We will offer you a reasonable price and produce samples for you ASAP.

Q: Is your product tested before shipping?

A: Yes, we will do pressure test on site for every item before packing.

Q: Can I mix different models in one container?

A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

Q: Could you help us design the products?

A: Yes, we have employed knowledgeable and experienced engineers and designers who are able to design products complied with international standards and as per customer's requirement.

Hot Tags: bs750 pillar fire hydrant, China, manufacturers, suppliers, factory, customized, price